Delta W6220GAS Commercial 3/8" 90 Degree Deck-Mount Turret Ball Valve Hose Cocks in Chrome Finish

• Two ball valves assembled at 90 degree in deckmount turret- assembled shank
  brass locknut
• Raised lockwasher for positive grip-- vandal resistant locking pins on turret(can be removed in field if not required)
• Ball valve hose cock(s)
• Floating ball-type design
• Universal 10 serration vandal resistant nozzle with 3.2mm(1/8") outlet - removable with flat on one side
• Forged brass non-removable vandal resistant handle (ADA compliant) - obvious on/off positions O-ring seals
• Maintenance free- no need to regrease sealing surfaces or take valve apart
• 10 year warranty-every ball valve carries its date of manufacture on the underside of the body
• Life cycle tested to up to 100,000 cycles
• Two ball valves assembled at 90 deg. in deckmount turret- assembled shank,brass locknut, raised lockwasher for positive grip-- vandal resistant locking pins on turret(can be removed in field if not required)
• Chrome Finish
• Assembled Shank: Shank (L)
• Overall length 4.44" [was SH1](2.84" exposed)
• Indexed For: GAS - Natural Gas(Blue)
• Check piston located in nozzle to prevent contamination of service lines and valve sealing surfaces (with exception of vacuum service)
• Use of this ball valve above 40 psi requires special clamping procedures by others to ensure that any hoses attached to nozzle do not blow off
• Factory tested to 125 psi
• Cannot be converted to any other valve.
• Shank With 1/4" IP tailpiece and coupling nut(Standard)
• SKU: W6220GAS

Product Specs:

• Specification Sheet
• Installation Instructions
• Manufacturer Page